Cisco Community
English
Register
Welcome Cisco Designated VIP 2021 Class in the 10th Year Anniversary of the Program -- CHECK THE LIST
Register
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel

Use snmpwalk to pull Nexus or MDS switches

Labels:
300
Views
0
Helpful
0
Comments
Galen Zhang
Cisco Employee
‎04-10-2019 08:19 PM
edited on: ‎04-10-2019 ‎08:19 PM

snmpwalk -v 1 -c public  <IP_ADDRESS_OF_THE_SWITCH>  

or 

snmpwalk -v 1 -c public  <IP_ADDRESS_OF_THE_SWITCH>   <OID>

 

For example, to pull zone information from MDS switch:

# snmpwalk -v 1 -c public  <IP_ADDRESS_OF_THE_SWITCH>  enterprises.9.9.294

0 Helpful
Latest Contents
OTV via MVPN(SP) with CSR 1000v
Created by crazy.xploring on 01-23-2021 12:27 PM
0
0
0
0
Hello, Its a lab setup. I have MVPN-SP configured and works successfully with SSM.But when I try to establish OTV between two DC sites via the same MVPN,  OTV does not come up.PIM neighborship get established with PE-12 and  PE-10 from... view more
SRTE support VxLAN on nxos?
Created by 9813108aa on 01-23-2021 07:52 AM
0
0
0
0
Hello All, In the data center, I need to run L2VPN, so I plan to use VxLAN EVPN as the overlay, but I hope that VxLAN EVPN can be forwarded by SR Traffic-eng using Explicit Path. I don’t know if this can be achieved on Nexus 9000 series switches? Doe... view more
ACI Tenant / VRF / L3Out Choices
Created by Alex Moore on 01-22-2021 05:30 PM
0
0
0
0
Hi, I am new to ACI, and currently trying to figure out how best to achieve my goals in terms of the high-level constructs, and could do with some advice/guidance. I have been reading numerous guides, but am still a little unsure whether what I am hoping ... view more
APIC1 Registered nodes stays inactive mode
Created by philasam79 on 01-22-2021 04:22 PM
3
0
3
0
Hi all, I have just brought up my Apic1 simulator. I did not change any of the default settings. The only parameter i changed was the IPv4 address for the mgmt to match my network. When i logged in, one leaf was already discovered. I registered the f... view more
ACI Contract Permit/Deny Syslog Logging - Not Working
Created by maced129 on 01-22-2021 11:16 AM
3
0
3
0
Hello, We are trying to get our contracts between EPGs to log the deny and permit traffic as seen within the Tenant > $tenant > Operational > Packets > L3 Permits/L3 Denys. According to the obscure documentation it seems that one of ... view more
Content for Community-Ad