This document describes options for deployment of vPC Peer Switch. When a Virtual Port Channel (vPC) is configured and operational, the Spanning Tree Protocol (STP) continues running on both vPC peer devices. The vPC peer switch is introduced to address performance concerns around these STP convergence events.
Familiarity and understanding of Nexus switches and Spanning tree protocol.
Hello,we are currently implementing our ACI fabric and have Version 4.1(1i) running.Is there a way to enter MAC addresses into the ACI configuration and preconfigure which EPGs this MAC address will be part of? So as soon as the endpoint is connected...
Cisco Workload Optimization Manager (CWOM)
Continuously Assure Application Performance at Any Scale
Webinar: Wednesday, October 23rd at 11am ET
Today’s applications utilize traditional virtualization platforms as well as newer DevOps meth...
Hi, I'm trying to find out definitively if the above card is compatible with the N9K-C9508-FM-E Fabric modules. When I do the configuration in CCW, the N9K-X9788TC-FX is the only 1/10GBaseT module option in CCW and the data sheet says it's compatible. How...
Hi all, I have a quick question about old Nexus N9k-C9372PX. Can they do simple vlan mapping 1-to-1 on a trunk port? Like this on Catalyst:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/15-02SG/configuration/guide/conf...