This topic is a chance to discuss more about Application Centric Infrastructure (ACI) solution, its hardware and software architecture, and the policy/object. An analysis and description of the functions and control plane protocols involved on the fabric discovery process will also be provided. In addition, experts will explain the concepts of VLAN pools, domains, tenants, virtual routing and forwarding (VRF), application profiles, endpoint groups (EPGs), bridge domains, and contracts.
Ask questions from Tuesday 17th to Friday 20th of September, 2019
Alejandro Avila is a Solutions Support Engineer on the Application Centric Infrastructure team at the Customer Experience (CX) Center. Before Alejandro joined the ACI team, he worked on the Enterprise Routing and Switching team troubleshooting different devices and platforms such as Metro Ethernet switches, Catalyst platforms, and Industrial Switches. He has experience in Data Center Routing and Switching technologies, particularly on Nexus devices that run NX-OS. Alejandro holds a CCNP certification on R&S.
Omar Hernandez is a Technical Consulting Engineer on the Application Centric Infrastructure team at the Customer Experience (CX) Center. Before Omar joined the ACI team, he worked as a Network Consulting Engineer where he designed and implemented Data Centers with ACI and Nexus devices (NX-OS). Omar holds a bachelor’s degree in telecommunication engineering from Mexico’s National University (UNAM). He holds a CCNP on R&S and Data Center.
Alejandro & Omar might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Application Centric Infrastructure community.
Hello,we are currently implementing our ACI fabric and have Version 4.1(1i) running.Is there a way to enter MAC addresses into the ACI configuration and preconfigure which EPGs this MAC address will be part of? So as soon as the endpoint is connected...
Hi, I'm trying to find out definitively if the above card is compatible with the N9K-C9508-FM-E Fabric modules. When I do the configuration in CCW, the N9K-X9788TC-FX is the only 1/10GBaseT module option in CCW and the data sheet says it's compatible. How...
Hi all, I have a quick question about old Nexus N9k-C9372PX. Can they do simple vlan mapping 1-to-1 on a trunk port? Like this on Catalyst:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/15-02SG/configuration/guide/conf...