This session provides an opportunity to learn and ask questions about Cisco Unified Computing System in general and the blades in more specific. Sivakumar will cover questions on design, configuration and troubleshooting.
The Cisco Unified Computing System™ is a next-generation data center platform that unites compute, network, storage access, and virtualization into a cohesive system designed to reduce total cost of ownership (TCO) and increase business agility. The system is an integrated, scalable, multichassis platform in which all resources participate in a unified management domain. Managed as a single system whether it has one server or hundreds of servers with thousands of virtual machines, the Cisco Unified Computing System decouples scale from complexity.
Ask questions from Monday, November 30 to Friday December 11, 2015
Sivakumar Sukumar is an experienced Customer support engineer in High-Touch Technical Services (HTTS) team supporting Data center Products. His areas of expertise include Cisco UCS, UCS central, Cisco Nexus 9000, Nexus 5000, Nexus 3000, Nexus 2000, MDS SAN switches, Cisco Application Control Engine (ACE), Cisco Wide Area Application Services (WAAS), Cisco Content Switching Module, Cisco Content Services Switches, and other content products. He has been with Cisco for more than 6 years, working with major customers to help resolve their issues related to content products. Prior to Cisco, he worked with IBM and other service providers managing their networks. Sivakumar holds a bachelors in Information Technologies from SSNCE Anna University Chennai India, and these Cisco certifications: CCIE (#44288) (in Datacenter), CCNA, CCNP, RHCE and VCP.
Sivakumar might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community
Hello,We have one fabric composed by only 1 MDS 9148 switches, and now, we want to add a new 9148 S MDS switch to this fabric.one VSAN (100) and one zone set activated on this switch.Now, we need to add a new switch in fabric. This new switch is also one ...
Hi All, Spine Leaf designs I have seen so far show a single link from Leaf to each Spine and the recommended solution to increase aggregate fabric throughput is to add another Spine. Is it a valid design to have multiple links from Leaf to Spine to a...
I found two different theory to handle l3 traffic for unknown IP in ACI one is stated below which is from White Paper 739989 and in other cisco live document I have seen that this will be treated via spine proxy method. "For (L3) routed traffic to an...
I found below note in cisco white paper i.e 739989 - end point learning but unable to understand it. "An exception exists for remote MAC address learning when a packet is incoming from L3Out to Cisco ACI. If ARP traffic is coming from an L3Out SVI ra...