This topic is a chance to discuss more about how to integrate, configure and troubleshoot FlexPod in the network. FlexPod is a pre-validated data center platform built on the Cisco Unified Computing System (Cisco UCS), Cisco Nexus family of switches, and NetApp® data management solutions. Its configurations and workloads allows you to deploy applications and converged infrastructure faster using proven solutions. Clarify all your queries and learn how FlexPod can be optimized for a variety of mixed workloads in both virtualized and non-virtualized environments
Ask questions from Monday, November 6th to Friday November 17th, 2017
Artem Tkachovis a Customer Support Engineer in Cisco Data Center Solutions team in Poland. He has been working with TAC for past 5+ years and has 10 years of industry experience working with enterprise deployment and troubleshooting. His areas of expertise currently include Nexus switches family series, Nexus 1000v, UCS-B/C Series, Flexpod/vBlock solution, MDS Series, etc. Artem holds CCIE certifications (# 39668) in Routing and Switching, Service Provider, Wireless and Data Center.
Artem might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Contact CenterCommunity
Hello,We have one fabric composed by only 1 MDS 9148 switches, and now, we want to add a new 9148 S MDS switch to this fabric.one VSAN (100) and one zone set activated on this switch.Now, we need to add a new switch in fabric. This new switch is also one ...
Hi All, Spine Leaf designs I have seen so far show a single link from Leaf to each Spine and the recommended solution to increase aggregate fabric throughput is to add another Spine. Is it a valid design to have multiple links from Leaf to Spine to a...
I found two different theory to handle l3 traffic for unknown IP in ACI one is stated below which is from White Paper 739989 and in other cisco live document I have seen that this will be treated via spine proxy method. "For (L3) routed traffic to an...
I found below note in cisco white paper i.e 739989 - end point learning but unable to understand it. "An exception exists for remote MAC address learning when a packet is incoming from L3Out to Cisco ACI. If ARP traffic is coming from an L3Out SVI ra...
Dears ,Please check as the ACI sandbox does not accept any simple action on it from yesterday ? even creation of a tenant returns "Error: 400 - the messaging layer was unable to deliver the stimulus (connection error, Connection refused)"