Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
onePK and OpenFlow
VMware ESX, ESXi, and vCenter
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.
Hello all,I have BGP configured on my Nexus 7010 and all seems to be working normally. But I am seeing a couple things that don't seem normal and am looking for inputs / suggestions. Here is my BGP config on the Nexus 7010router bgp 65172 route...
We are running an Oracle RAC database 2 node cluster on Cisco B200M4 / Firmware 3.2(3i)B / enic 188.8.131.52 / and see RX drops for one VNIC interface. We then have increased RX/TX queues, ring sizes and RSS in Ethernet Policy and will enable MTU 9000 t...
Good Morning,We are trying to configure PIM inside fabric (without external L3 itcx), but doesn´t work. We have deployed 4.0(3d) release and we have seen PIM with static RP is supported from this version. Have somebody configured it sometime ?Thank ...
Hello! We currently have a VMM deploying towards VMwares vCenter, however we are seeing some cosmetic timeout faults(?) using the Virtual Edge. Fault delegate: Operational issues detected for Host in VMM controller: IP with name vCenter-VM in da...
I have implemented below config in IOS, appreciate if someone can help me to configure the same in NX-OS (nxos.7.0.3.x.x) to get the same outcome ? snmp-server view <SNMP_VIEW> iso includedsnmp-server group <SNMP_GROUP> v3 auth read...