Original Expert Webcast Tuesday, March 17, 2015 at 10:00 am Pacific with Niles Pyelshak
Ever wonder what VFC, VETH, VIF and HIF are in UCS and which path your packets are taking? UCS infrastructure has several virtual components and this makes it challenging to troubleshoot but it is critical to understand. In this Webcast, Niles will discuss UCS interfaces and how packets travels from the UCS server. This includes what happens when a packet leaves a server from the vnic until it traverses the Fabric interconnect. Once you understand the data path, you will be able to troubleshoot the Unified Computing System
Niles Pyelshak is a Customer Support Engineer for Cisco TAC works in Server Virtualization Team. She has several years of networking and virtualization experience. She recently passed her CCIE Certification in Data Center (#44608). As a Network Engineer, Niles was accustomed to getting on the command line interface (CLI) to configure and build her network. In server virtualization it is a little different. She is always amazed at how servers are mostly managed by Graphical User Interface(GUI) interfaces and CLI. One can not underestimate the power of both interfaces and in this Webcast, Niles will leverage both GUI and CLI to demonstrate the UCS life of a packet.
Identify UCS virtual components required for troubleshooting
Understanding command line interface (CLI) to configure and build a network
Dear experts i would like to know the differences between the Nexus 9300 9300 EX/FX/FX2/FX3 switches, some of them i know according to the below link but FX3 are new comers what are the differentiate in FX3.https://www.ciscolive.com/c/dam/r/cisc...
Hello everyone !! Would somebody kindly help me to fix this issue?Due to security policies I need to receive the successful and unsuccessful SSH logins on my centralized syslog servers, I'm able to see and receive properly the unsuccessful login mess...
Hi I have bgp ipv4 unicast neighborship with 2 WAN routers. I learn few bgp prefixes that i set community for. I have a bgp ipv4 multicast peering with a firewall. I want to advertise prefixes learnt from the wan-router via address family ...
This is what I got from running moquery -c aaaActiveUserSession on an apic, for a specific service account. expiryTime : 2020-10-16T10:00:33.949-05:00loginTime : 2020-10-16T07:00:23.900-05:00 When I run the same command on a different apic,...