cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
399
Views
0
Helpful
2
Replies
Highlighted
Beginner

3000 Series FEX

Hey guys,

 

Do you know if any of the 3000 nexus series support FEX? Specifically 3524-X and B22HP. I’ve trawled through the config guides and can see FEX commands for the 3600 but not for the 3524-X.

 

I know the 7000 series do and some of the 9000 series do. These B22HP are old school.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Hello @Amayacitta ,

No.

The B22HP only supports the parents 5K, 6K, 7K and 9K (with some restrictions).

 

Remi Astruc

View solution in original post

2 REPLIES 2
Highlighted
Beginner

Hello @Amayacitta ,

No.

The B22HP only supports the parents 5K, 6K, 7K and 9K (with some restrictions).

 

Remi Astruc

View solution in original post

Highlighted

Cheers look like the only actively sold fixed port switch is the Nexus 93180YC.Release notes confirm support here.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/release/notes/70351_nxos_rn.html#_Toc456959075

 

The 6100 would of been good but it went EOS 2017.

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-6001-switch/data_sheet_c78-726128.html

 

I guess the alternative is to source some standard 10Gb SFP+ Flex Fabric modules for the HP enclosure and do away with the FEX. Probably a better (and cheaper) solution.

 

Thanks for the assist @Remi Astruc !

Content for Community-Ad