cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

152
Views
0
Helpful
2
Replies
Beginner

3000 Series FEX

Hey guys,

 

Do you know if any of the 3000 nexus series support FEX? Specifically 3524-X and B22HP. I’ve trawled through the config guides and can see FEX commands for the 3600 but not for the 3524-X.

 

I know the 7000 series do and some of the 9000 series do. These B22HP are old school.

1 ACCEPTED SOLUTION

Accepted Solutions
Beginner

Re: 3000 Series FEX

Hello @Amayacitta ,

No.

The B22HP only supports the parents 5K, 6K, 7K and 9K (with some restrictions).

 

Remi Astruc

2 REPLIES 2
Beginner

Re: 3000 Series FEX

Hello @Amayacitta ,

No.

The B22HP only supports the parents 5K, 6K, 7K and 9K (with some restrictions).

 

Remi Astruc

Highlighted
Beginner

Re: 3000 Series FEX

Cheers look like the only actively sold fixed port switch is the Nexus 93180YC.Release notes confirm support here.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/release/notes/70351_nxos_rn.html#_Toc456959075

 

The 6100 would of been good but it went EOS 2017.

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-6001-switch/data_sheet_c78-726128.html

 

I guess the alternative is to source some standard 10Gb SFP+ Flex Fabric modules for the HP enclosure and do away with the FEX. Probably a better (and cheaper) solution.

 

Thanks for the assist @Remi Astruc !

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.