I have a pair of ASA 5585-X configured in L2 Transparent in Active/Standby mode. SSH to mgmt IP, ASDM access , both are properly authenticated via tacacs.
I have configured serial authentication to use LOCAL authentication. But it does not work. Our terminal server has a connection to ASAs serial port and when i tried to connect through that, it always failing local authentication.
is my configuration correct? Am i missing something?
Cisco Adaptive Security Appliance Software Version 9.6(4)
Device Manager Version 7.6(2)
Hardware: ASA5585-SSP-40,
TS01#sh run | in fw
ip host fw 2013 10.155.9.18
TS01#fw
Trying fw (10.155.9.18, 2013)... Open
User Access Verification
Username: testadmin
Password:
% Authentication failed
User Access Verification
Username:
FW01/pri/act# show run | in aaa
aaa-server GROUP-TACACS protocol tacacs+
aaa-server GROUP-TACACS (mgmt) host 10.155.6.45
aaa-server GROUP-TACACS (mgmt) host 10.155.6.42
aaa authentication ssh console GROUP-TACACS LOCAL
aaa authentication http console GROUP-TACACS LOCAL
aaa authentication serial console LOCAL
aaa accounting command GROUP-TACACS
aaa authorization exec authentication-server auto-enable
FW01/pri/act# sh run | in username
username testuser password BG4.FJZX5sr/XCTl encrypted privilege 15
username testadmin password Z4AYGGjhsFZcyj82 encrypted privilege 15
FW01/pri/act#
