Audit on NX-OS

[mario.jost]

I would like to configure our Nexus switches to send every command to our central syslog server, as all our catalyst switches do. So on IOS we do it like this

archive
 log config
  logging enable
  notify syslog contenttype plaintext
  hidekeys

It sends all commands to the buffered log and to our central syslog server

Nov  2 10:58:14.422: %PARSER-5-CFGLOG_LOGGEDCMD: User:admjos  logged command:interface GigabitEthernet0/0/2.11 
Nov  2 10:58:15.105: %PARSER-5-CFGLOG_LOGGEDCMD: User:admjos  logged command:description WAN (L2)
Nov  2 10:58:16.634: %PARSER-5-CFGLOG_LOGGEDCMD: User:admjos  logged command:exit 

How can i do the same on NX-OS?

[parveshtaneja2005 · Accepted solution]

Hi,

See if this helps.

https://community.cisco.com/t5/network-management/log-configuration-changes-to-syslog-on-nexus-7000/td-p/2509022

thanks and regards,