Data Center Switches

Hello,Unfortunately I don't have any TAC access but I strongly believe I'm hitting some bug here (hopefully I'm wrong and there could be an explanation to this) but let me explain....We are now performing migration from our switched traffic to a EVPN...

Is it possible to deploy/manage a spineless VXLAN/EVPN fabric with DCNM using pre-built templates? Everything that I've read or seen in the configuration guide points to no. 

Let's say if we were to upgrade from 9148T Fabric Switch thru to Cisco MDS 9396T, what is best and simple method. On a high level; In Brocade, we would clear configuration on the new switch first, assign an unique Domain ID, ISL it to the legacy swit...

What is cisco SFP part number for  "1Gbase-CISCO-AVAGO". I am unable to find by "1Gbase-CISCO-AVAGO" or "SFBR-5780APZ-CS2" on cisco.com ccw or https://tmgmatrix.cisco.com/.Ethernet1/1transceiver is presenttype is 1Gbase-CISCO-AVAGOname is CISCO-AVAGO...

We are getting below error continuously in our Nexus 7k device. %USER-2-SYSTEM_MSG: (cmd_rep_attr_add) tlv_handle is full - ipqosmgr But there are not enough details on the Internet to understand this. Is anyone having experience with this kind of er...

Hi, Is there any way of monitoring the configured levels of EVPN Multisite unicast/broadcast/multicast traffics, e.g. to baseline a topology before optimising storm control values. Also, I see there is a new feature "Dual RD" in 9.3(5) and later. Wha...

Hi, We currently have 2 Data Centers that are connected via a 10GB Point-to-Point connection. We have recently acquired a secondary 1GB Point-to-Point connection for redundnacy. Data Centre (A) has 2 Nexus 9K switches that are connected in a VPC. Dat...

Good afternoon, I have a number of Cisco MDS 9124 where by I would need to erase the units to factory defaults, Thank you,Paul 

When DCNM upgrade version from 11.2(1) to 11.5(1) , need not to new license attached, right? In each DCNM version, license is binding to mac address so need not to dispatch new license , right?  

I have just deployed DNCM within a small greenfield DC environment. Thus far , I have been able to discover my switches and have them populate within my inventory of fabric switches. However, when I go in to actually push out my created fabric templa...