This documentation seems wrong, and doesn't work. Am I missing something or does the documentation need to be fixed.Talking about :Configuration Centralized VRF Route-Leaking - Shared Internet with Custom VRFhttps://www.cisco.com/c/en/us/td/docs/swit...
Forum Posts
I am going to replace fabric modules model N9K-C9508-FM-E with model N9K-C9508-FM-E2, with the C9508 ACI-Mode device turned on. Is there no problem if I make this replacement with the device turned on?
What features does Nexus N9K-C93108TC-FX3 support if it's ordered without any license in NX-OS mode?
I have two 93180YC-EX switch configured as vpc . running as leaf switch connect to spine swtich I found weird problem I can find 1535 host routes on two leaf switches, but one leaf1 we can find most host routes put into host trie route Total number ...
Nexus 93180YC-FX3 switches contain an "GNSS" LED at their front * which is not part of the documentation (hardware installation guide for example) Since "feature frequency-synchronization" has to be licensed (DCN SyncE Add-On License)* GNSS seems t...
Transport: Type: CSLUCslu address: https://10.50.0.xxx/cslu/v1/pi/xxxxx-1!sho license certs Production Cert: TruePIID: <empty> Licensing Certificated: Root Cert Info:Start Date: May 30 19:48:47 2013 UTCExpiry Date: May 30 19:48:47 2038 UTCVersion Num...
Hi, I have question about cvr-qsfp28-sfp25g compatibility with N9K-C93108TC-FX3P on tmgmatrix if i need to use 25G on interface 40/100G i will choose to use cvr-qsfp28-sfp25g adapter with SFP-25G-SL i have 3 question - cvr-qsfp28-sfp25g can compatibi...
We are looking to repurpose some of our Catalyst C9500 switches and deploy them as Spines in a VXLAN fabric connected to Nexus N9336 Leafs. Are there any known gotchyas when mixing OS' in a fabric?
Can this be fixed or does it need RMA?ERROR ERROR No bootflash. Rebooting in 30 secsERROR ERROR No bootflash. Rebooting in 20 secsERROR ERROR No bootflash. Rebooting in 10 secsCISCO MODULEBIOS Ver: 5.43Switch G5RC Revision: 02.03.00Memory Information...
Team, After testing a configuration with 2 9k Nexus, 1 iosvl2 switch, and an ios host testing HSRP and it is not working during a simulated down interface event. Everything else seems fine VPC checks, port-channels check, HSRP checks, tracking checks...
Resolved! vPC
In vPC does the vPC peer link carry traffic of a non vPC vlan?
I am setting up a new vxlan bgp evpn network with two spine and 10 leafs using a mix of Nexus 9300 switches. I have a few questions:1. I am planning to do layer 2 vxlan bgp evpn fabric. My L3 is firewall that is connected to upstream switch (outside ...
Resolved! Nexus 9504 Dual Supervisor Upgrade
I have a Nexus 9504 with dual supervisors I am unclear having read the release notes for 9.3(10) as to how the upgrade works. There is no concept of a slave supervisor looking at the directory structure. The release notes state to conduct the upgrade...
Hi team, Is it possible to configure macsec on a 100G unplink Nexus C93180YC-FX3? I found this information about the Nexus 93180YC-FX3"Beginning with Cisco NX-OS Release 9.3(7), the Cisco Nexus 93180YC-FX3, and 93108TC-FX3P switches support MACsec o...
Resolved! NETFLOW ON N5K vPC
Hi, I want to configure netflow on N5K in two switches in vPC, follow the config:feature netflowflow record record_nfmatch ipv4 source addressmatch ipv4 destination addressmatch transport source-portmatch transport destination-portcollect counter byt...
