Data Center Switches

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Save 25% on Day-2 Operations Add-On License

 

Forum Posts

I have some 9336's running version 9.2 with the proper EPLD installed.   I'm being told due to some odd behavior that I should downgrade to the suggested NX-OS line of 7.x.  My question is, should I also downgrade the EPLD from 9.x to 7.x before the ...

ppalmerjr by Level 1
  • 1253 Views
  • 0 replies
  • 0 Helpful votes

With our current deployment we are pair of nexus 7000 running multiple vdc. Nexus 9000 running ACI mode is there support for running isolated environment similar to the vdc? 

Having an interesting issue I believe is related to how VPC and HSRP works in NXOS. We have two datacenters connected together via a layer 2 trunk. The goal is to be able to failover to either datacenter for the ESX environment if either datacenter s...

4octet by Level 1
  • 1655 Views
  • 2 replies
  • 0 Helpful votes

I currently have a Nexus 3048TP which presents some concerning messages about the NVRam when it's booting. I've attached a full boot log with important parts highlighted/bolded. Booting kickstart image: bootflash:/nxos.9.2.3.bin CardIndex = 11056 Im...

wj343 by Level 1
  • 1809 Views
  • 1 replies
  • 0 Helpful votes

Dear All, I have a couple of Nexus 5596 switches running code version 5.2(1)N1(9a) that  I want to upgrade  to version 7.3(5)N1(1).    I have chosen the upgrade path for the nexus switch as : 5.2(1)N1(9a) >> 7.0(8)N1(1) >> 7.1(5)N1(1b) >> 7.3(5)N1(1)...

leolink1 by Level 1
  • 1099 Views
  • 1 replies
  • 0 Helpful votes

Hi Every Experts! In Cisco Nexus 2300 datasheet, it mentions Nexus 2348TQ FCoE support up to 30m with Category 6a and 7 cables, does it means the storage can be directly connected to Nexus 2348TQ by configuring the port to run FCoE? Cisco Nexus 2300 ...

Hi there,Thanks for reading.Might be the wrong forum... we're connecting Catalyst 3850s to servers with SFP-H10GB-CU1M (2 ports each on two 3850s).  On both switches, one port is fine, the other is showing the hardware as "Te2/0/13" "1000BaseSX SFP" ...

Bob Greer by Level 4
  • 1232 Views
  • 1 replies
  • 0 Helpful votes

Hi everyone,I have a problem with NTP on our Nexus9k.I have changed ntp configuration from:ntp server 10.20.1.1 prefer use-vrf management ntp server 10.20.1.2 use-vrf management ntp source-interface mgmt0to this: ntp server 10.10.1.1 prefer use-vrf m...

n-86 by Level 1
  • 2329 Views
  • 1 replies
  • 0 Helpful votes