Data Center Switches

I`m getting alot of logging error, who repeat:%KERN-2-SYSTEM_MSG: [38069156.726580] mts_print_longest_queue_state: opcode counts for first and last 50 messages in recv_q of sap 1016: - kernel%KERN-2-SYSTEM_MSG: [38069156.726585] mts_print_msg_opcode_...

Dear,   I have the following setup:                                 (HQ)                                                                                       (DR) Nexus 7000 core SW1 -- vPC--Nexus 7000 core SW1                              Nexus 700...

Hello all,   I'm encountering some issue regarding SNMP polling on this type of Nexus, sometimes 50 seconds or more is necessary to get the response from the device, it generally lasts for 15 minutes & it's only between 12.30pm & 13pm CET.   Is there...

Hello,   is Cisco going to release Visio stencils for this product any soon?   Thanks

Hi Community   Im trying to filter the advertisement of tagged routes from leaving a routed interface on an 77k ABR with a tag of 50, that have come in from an ASBR source into my backbone area. My 77k is an ABR on OSPF Area 0 and has child area 40. ...

On the Cisco Nexus Switch 3048, I did a password recovery. I have assigned a new password, then loaded the bootflash and then the following error messages have occurred and the password after login was also not accepted. What could be the mistake? sw...

Hi all! I need to filter igmp host query messages coming to some ports of Nexus 5596. I have configured an ACL:   ip access-list NOMCAST 10 deny igmp any any host-query 20 permit igmp any any 30 permit ip any any statistics   and added it to interfac...

Hi,     now we want to migrate a traditional network and business to new VxLAN network , found some problem , one is hsrp.    because business is very critical for customer, they want to migration work is smooth and do not interrupt in ms(less one se...

hello all,I have extreme switch 8900-10G24X-Cand I want to buy cisco switch compatible  make redundancy auto fail-over with extreme switch 8900-10G24X-Ccan any one help my what is model in cisco compatible to make thisI found the model cisco  catalys...

Hi     I am trying to implement policing in nexus 5672UP switch.  I want to limit the upload and download bandwidth to 2M on interface vlan 10.      I have created the policy-map but I am not able to find the "service-policy " command inside the inte...

Hi All,   How to span HTTP traffic on Nexus 7K from a layer 3 port-channel subinterface? please share syntax if possible.   thanks,

Dear all     Even the ERSPAN monitoring shows it is up it does not work with cisco Nexus 5672UP - version 7.0(8)N1(1). No traffic is send through.   Configuration is correct until the fact that in ERSPAN Destination the default VRF cannot be set (in ...