Dear all Even the ERSPAN monitoring shows it is up it does not work with cisco Nexus 5672UP - version 7.0(8)N1(1). No traffic is send through. Configuration is correct until the fact that in ERSPAN Destination the default VRF cannot be set (in ...
Dear all Even the ERSPAN monitoring shows it is up it does not work with cisco Nexus 5672UP - version 7.0(8)N1(1). No traffic is send through. Configuration is correct until the fact that in ERSPAN Destination the default VRF cannot be set (in ...
Hi,i have an otv setup between two Data centers. The OTV is working (ASR-1K) fine but the mac address from site A is not learned via the OTV bridge-domain in Nexus 5696. The mac address is learned on the remote OTV router bridge-domain but not to th...
I can't find 6500 visio stencils on Cisco site. Do they exist?
Hello! I'm wondering, does Nexus FEX ports support dot3adAgg OIDs? http://www.oidview.com/mibs/0/IEEE8023-LAG-MIB.html I checked some of 5K and 9K Nexus, and no one has it for FEX ports.
please suggest which line is card is suits for 6506E series switch. Requirement is need of 10 Gig optical port with multimode (SR). Supervisor engine is 720
I have a Nexus9000 C9372TX and a Nexus9000 C93108TC-EX (C9372TX ios nxos.7.0.3.I2.2a.bin & C93108TC ios nxos.7.0.3.I4.3.bin) in port 53 on both a QSFP-40G-SR-BD Ethernet1/53 transceiver is present type is QSFP-40G-SR-BD name is CISCO-AV...
We are considering replacing our 6509e in our core with a solution that is more robust, need several modules that have 10 gig capability SFP+, UPOE, 1 Gigabit Ethernet with POE RJ45, redundancy, and will last us another 5-8 years. We currently have ...
Hi Everyone, I have a case with the behavior of HSRP working with vPC. I have a pair of N7706 (code 8.2) forming a vPC Domain and make a vPC connection to a N93108TC-EX. On this lab, I have 2 VLAN 49, 53 which are provisioned on all 3 switches, an...
Hello, Please see below for the output of "show hardware access-list resource utilization". What will happen if TCAM space allocation for "SUP COPP" is exhausted? Thanks you so much.
It is required to disable the bootp in nexus 7000.by audit request
Dear Support Team ,Can anyone tell me whether Nexus 3548 switch support IP SLA in release 7.0 .It would be highly appreciated if you reply .Please have a look the below url :Cisco Nexus 3000 Series NX-OS Release Notes, Release 7.0(3)I7(3) - CiscoWith...
I have a very simple Nexus 9000v test set up with two leaf switches and a single spine with an EVPN VXLAN configuration. A single L2 VNI is configured and is using BGP ingress-replication. The spine switch is configured with an NVE interface becaus...
I have 2 cisco 9500 series switch and i want to stack that but its not happening,any one can suggest me. I have checked in internet and tied but its not working. Both IOS version is same 16.06.04 Port also same speed and full duplex So please give m...
Hi, I have inherited a pair of Nexus 9ks that are already running in production. Under the vPC configuration, 'peer-switch' is configured. I was reading up on that parameter and it said that the Type 1 parameters for the vPC and switches have to ma...
I have a concern is PDA es enabled in the Sw Nexus 7000? and if so, how can you disable it? Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-24-2024 10:01 PM | ||
04-16-2024 04:52 AM | ||
04-10-2024 08:28 PM | ||
04-08-2024 08:49 AM | ||
04-08-2024 03:49 AM |