Data Center Switches

Is there any way to do local command accounting in NX-OS without having to use RADIUS or TACACS?I'm testing out the Nexus Dashboard Fabric Controller automating VXLAN EVPN on NX-OS, and I'd like to see in real-time what commands the controller is sen...

Hi Guys, just want to clarify, can I do a VPC in a 2x Nexus 10G Base-T switches (N9K-C93108TC-FX3P)? Per documentation, I should use 10G as a Peer-Link, will the 10G copper port can do that? Thanks

Team,   We have 2 x N7K in VPC as cores and a layer 2 access layer C9300 switch connected to these N7Ks redundant to each other. I want to capture the wireshark of N7K uplinks interfaces towards this access switch and monitor PC is connected to acces...

Hi,Were going to be purchasing a couple N9K-C93360YC-FX2's to replace a couple 56128's.  On the new 9K's we'll only need layer2 functions and the ability to create multiple SVI's and a few static routes.  Do we need an additional license added to the...

Please guide me nexus 9348gc-fxp support to 2k fex ?

Good Morning, I wanted to ask you for information regarding the compatibility of the Nexus N7K-F312FQ-25 card with the 25Giga SFP-H25GB-SR transceiver. Is there a document/datasheet that certifies this compatibility?   Thanks!!!

I am trying to accomplish scp or sftp backup using a user with a keypair. on a NX9K switch with NX-OS version 9.3.12.I am using this procedure: https://www.cisco.com/c/en/us/support/docs/switches/nexus-9000-series-switches/215025-configure-ssh-passwo...

why do we need to login each switch individually in VPC in pair and we can get single login in VSS ?what is difference between VPC and fabric path ?how do we implement VPC in fabric Path ?

Hi folks,A client of mine is considering purchasing ACI Mini fabric, despite the limitation stated on Cisco's documentation. They're going for remote leaf topology, with 5 new leaf switches. Both of these, iirc, are not supported in ACI Mini fabric.I...

Hi All,Is there any way to manually change the flapping value on Cisco nexus switches.2024 Feb 23 07:33:40 Core_MainIT %L2FM-2-L2FM_MAC_FLAP_DISABLE_LEARN_N3K: Loops detected in the network for mac ec8e.b570.16bd among ports Po200 and Eth1/6 vlan 1 -...

I am dealing with very strange issue but wanted to check with experts if i am doing anything stupid or not. I have small size EVPN+VxLAN clos network (OSFP+iBGP+Multicast+Arp-suppression (no anycastgateway) is in my setup) very standard configuration...

Is there a command on NX-OS for switch to become a TFTP Server like on Catalyst IOS tftp-server flash:"filename"