Data Center Switches

Hi to all.I have an infrastructure with vCenter and ESXi 5.0 Upd1 and 6 N1Kv 4.2 (1) SV1 (5.1) in HANow I want to install a sencond infrastructure with vCenter 5.1 Upd B and ESXi 5.1 Upd B and 4 N1Kv 4.2 (1) SV2 (2.1) in HAWhat I was interested to k...

HiWe have two vem installed on two ESX with two CPU.We have installed 4 licences. Everything works fine but the output of "show licence usage" is different from our other nexus1000v.# show license usage Feature                      Ins  Lic   Status ...

Hello,thank you for reading this post.I'm currently having an issue with nexus 1000v. the commands "show switch edition" or "svs switch edition" were not valid from the CLI of the 1000v console.n1000v-1# sh sw?  switchname  Show the system's hostname...

I've added a host and one VM to the Nexus 1000V and I can't get the VM to ping to save my life. Here is my running config:!Command: show running-config!Time: Fri Jun 28 21:14:30 2013version 4.2(1)SV2(1.1a)svs switch edition essentialfeature telnetuse...

hi all,is there a way to configure the primary vsm on the secondary vsa node.i know i can do a system switchover on the vsm, but is there another way?thanks a lotronald

Hi,In deploying N1KV version 5.2.1 and testing ping responses on the management network, we are seeing reply time=0 ms.  Previously, this metric was outputted in three significant figures representing microseconds.  In any event, it should at least b...

Hi Team,Please I  want to resolve the issue ASAP.I am getting below error on Nexus 1000v and also in the nexus 5k the portchannel 41 is showing down( same related issue).Logs:---------2012 Nov 22 12:08:36 NX1000v %ETHPORT-5-IF_UP: Interface Vethernet...

Hello,I want to know if it's possible to manage/monitor Nexus 1000v components and related (VSM, VEM, VNMC, VSG, ASA 1000v) with SNMP (polling and/or traps) ?If yes, could someone give me some explanations ?Thanks for your help!Benoit

Question1: Does Nexus 1000v has the option to do Static Routing? Question2: Is there any alternatives are vavilable (with ACL security) to do Inter-VLAN communication without the help of External L3 Switch?

Hi Everyone, I would like to check if anyone experienced this before.  I am seeing unknown enum 20000 on the interface speed.  I am using a VIC1240 with 2 vNIC.Nexus 1000v is 4.2(1)SV1(5.1a). Any ideas how I can solve this?  Thank you.  Capture shown...