Data Center Switches

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Save 25% on Day-2 Operations Add-On License

 

Forum Posts

Hi there,I'm testing the VSG with vPath, managed by the VNMC.Everything work fine, until i have used a rdp(27) protocol rule.Indeed, if I create a permit rule with the rdp(27) protocol ahead a deny all rule, the term monitor shows the tcp 3389 goes t...

nvermande by Level 1
  • 887 Views
  • 0 replies
  • 0 Helpful votes

Having a bit of a problem with connectivity from host to network.  Running version 4.2(1)SV1(4). port-profile type ethernet data-uplink  vmware port-group  switchport mode trunk  switchport trunk native vlan 999  switchport trunk allowed vlan 600,999...

paul.ward by Level 1
  • 1658 Views
  • 2 replies
  • 0 Helpful votes

Hello,I have some questions if you can help me out please.1-Just need to understand the difference between configuring port-channel mac-pinning Vs port-channel LACP on the Nexus1000v? what do i gain or loose by having one versus the other?2-when conf...

mhasabal by Level 1
  • 3661 Views
  • 2 replies
  • 1 Helpful votes

What are all the deployment options for the 1000V VSM?  (Which of the following are true?)1. A downloadable virtual appliance2. Nexus 1010 physical appliance3. Installable ISO on a VM3. Installable on commodity server hardware

Hello,I have a ethernet profile that is "channel-group auto mode on mac-pinning" the associated eth interfaces generated PO number in auto mode to PO11.I noticed that when VSM lose connection to VEM, VEM module is removed wth his interfaces (PO11 is ...

helenio by Level 1
  • 1355 Views
  • 1 replies
  • 0 Helpful votes

Hello,I have two Nexus 1010 deployed in Active/Standby mode, uplink type 3. I have connect the port eth1 of each Nx1010 to upstream switch-1 port Gi0/1 and Gi0/2 and port eth3 to port gi0/5 and i see the next problem"003507: Apr 25 14:44:07.258: %SW_...

Hi,I am getting an error when trying to add a VLAN to one of my Uplink profiles. I have 2 uplink profiles and one worked fine, but the other will not add the VLAN.Here is the output:7i27i2(config)# port-profile type ethernet Uplink-Communication7i27i...

pz by Level 1
  • 3450 Views
  • 5 replies
  • 0 Helpful votes

Hi Gurus,We have already upgraded the VSM and now trying to upgrade VEM using VUM.I have issued the following commands:vmware vem upgrade notifyAdministrator accepted in vCentervmware vem upgrade proceedAfter that I am getting error:uviprswin1k1# sh ...

Hello Everyone,Th Lady Luck got angry with me and I (Firewall Engineer) has been assigned to Upgrade a Critical Cisco Nexus 1000V Cluster with latest 4.2(1)SV1(4)Here are my Setup Details:-Current VSM:-Software  loader:    version 1.2(2) [last: image...

k.shandil by Level 1
  • 1401 Views
  • 2 replies
  • 0 Helpful votes

Hi,I am looking for answer how such a configuration would work: pair of VSM and pair of vCenter servers with HA over L3. According to vmware the redundancy is on the DNS level - hostname of the secondary vCenter server remains the same, but IP addres...

robertas by Level 1
  • 1677 Views
  • 3 replies
  • 0 Helpful votes

I have setup the management interface with an ip address on 1000v. From a external machine i can ping the 1000v management IP but 1000v cannot ping any external devices. 1000v can only ping the ESX server IP!!!