Data Center Switches

Hi, Hi, I have two Nexus 5672 switches with active FCOE protocol. They have worked without problems for several years. We are noticing some issues such as: %NPV-5-FRAME_DISCARDED: %$VSAN 4%$ Frame with unexpected FC2 status 0xc received on interface ...

I have been working on an environment where a design was completed prior to my engagement. This is my first foray into configuring VXLAN but I have some experience with overlays/ACI/etc so am fairly comfortable. Design has 2x border leafs, 2x spines,...

Anyone out there been able to get this particular combination working? Nexus N9K-C93180YC-FX3 - SFP-H25G-CU3M - Catalyst C9300-48P (C9300-NM2Y) A few posts suggest success with paring a Nx93180 with a Catalyst, but sometimes the SFP used is different...

Hi,When EVPN is deployed using VLAN Aware bundle I know that all RT-2 bring the VLAN ID in the ethernet tag field. I would like to know is this apply to RT5, or if Ethernet tag should always be 0 for incoming RT5.

Hi all!We're looking for solution to redirect web-traffic to proxy server by using ITD.Looking at WCCP Replacement case (link is below) i'd like to ask if ITD changes SIP, DIP fields when it comes to redirect traffic to proxy? Or it works more in PBR...

Hello We changed recently N7K-SUP removed from other Nexus 7K, but after switch loaded in logs we've been observing the name of the Nexus 7K from which we removed this supervisor Here's the output from this switch: n7k-dc1# show system redundancy sta...

Is there any way to do local command accounting in NX-OS without having to use RADIUS or TACACS?I'm testing out the Nexus Dashboard Fabric Controller automating VXLAN EVPN on NX-OS, and I'd like to see in real-time what commands the controller is sen...

Hi Guys, just want to clarify, can I do a VPC in a 2x Nexus 10G Base-T switches (N9K-C93108TC-FX3P)? Per documentation, I should use 10G as a Peer-Link, will the 10G copper port can do that? Thanks

Team,   We have 2 x N7K in VPC as cores and a layer 2 access layer C9300 switch connected to these N7Ks redundant to each other. I want to capture the wireshark of N7K uplinks interfaces towards this access switch and monitor PC is connected to acces...

Hi,Were going to be purchasing a couple N9K-C93360YC-FX2's to replace a couple 56128's.  On the new 9K's we'll only need layer2 functions and the ability to create multiple SVI's and a few static routes.  Do we need an additional license added to the...

Please guide me nexus 9348gc-fxp support to 2k fex ?

Good Morning, I wanted to ask you for information regarding the compatibility of the Nexus N7K-F312FQ-25 card with the 25Giga SFP-H25GB-SR transceiver. Is there a document/datasheet that certifies this compatibility?   Thanks!!!

I am trying to accomplish scp or sftp backup using a user with a keypair. on a NX9K switch with NX-OS version 9.3.12.I am using this procedure: https://www.cisco.com/c/en/us/support/docs/switches/nexus-9000-series-switches/215025-configure-ssh-passwo...