Dear all,do you have any suggestion where I can find useful information over www in order to provide DC interconnection of my two merging customers where one is running MPLS/VPLS with Juniper technology and the other one EVPN/VXLAN with Cisco ?The cu...
Forum Posts
anyone know how to manage Cisco MDS 9148 via GUI or web interface for free?
Hi All, We have recently purchased Nexus 93180YC-FX and want to use SFP-10G-LRM SFP's to connect to existing infrastructure. Can anyone confirm that these SFP's are supported? Thank youBen
Hi all,I'm using two Nexus 9336C-FX2 as vPC Pair.Accidentially, the primary vPC Peer is configured with spanning tree method short and the secondary vPC Peer is configured with spanning tree method long.I would like to configure the primary vPC peer ...
All I could find on cisco website that you can mount those modules on N5k-c5696Q chassis!my question is for N5K-C56128P chassis? I mean physically it seems you can, I don't know if logically supports it..Thanks
Resolved! N3K-C3548P-10G replacement
Greetings, Please let me know if I should replace the N3K-C3548P-10G with N3K-C3548P-10GX or is it better go to the Catalyst 9000 series then moving away from Nexus. Thanks,Edouard.
Hello, The situation is that i've 5548UP Switch with very old software version: SoftwareBIOS: version 3.6.0loader: version N/Akickstart: version 7.0(5)N1(1)system: version 7.0(5)N1(1)Power Sequencer Firmware:Module 1: version v1.0Module 2: version v0...
Hello all. I have a nexus switch that is not booting with system image. I have formatted the boothflash of a 5596UP. From the loader mode I transferred the Kickstart image (n5000-uk9-kickstart.7.1.5.N1.1b.bin) to the flash and booted it - it went wel...
Resolved! about nexus 9000 Performance
Considering introduction of nexus 9000 from nexus 5000 Is there a performance limit on the traffic impact when setting span on the nexus 9000?
Hi All. I'm building a design for a media solution, I'll use 64 40/100 GE switches with NBM with 32 hosts and 32 uplinks. Is there any restriction with NBM when looking to the number of parallel uplinks I can use ? I don't want to hit a limitation, I...
With the four queue model setup like this: policy-map type queuing Outboundclass type queuing c-out-8q-q7priority level 1class type queuing c-out-8q-q6bandwidth remaining percent 30class type queuing c-out-8q-q5bandwidth remaining percent 20class typ...
Resolved! N9K: vlan interface down (vrf unusable)
Hello. I have created a new vlan interface in a N9k switch. After that, in show interface output, the interface is "down (VRF unusable)' I have checked that the VRF exist in the switch and in its vpc peer, that the vlan also exist and that is allow...
I have a cisco MDS 9000 series switch with model 9148T 48X32G FC and running 8.3(2) version.I have a file with a backslash in the boot flash directory MDS6620C-H25U18# dir bootflash:bootflash/3309 Mar 09 13:53:40 2021 mts.log4096 Nov 02 18:59:57 2017...
Thinking of migrating Nexus 7000 to Nexus 9300 series. Can someone point me in the right direction the differences and what is supported and not supported? I heard that storage protocols are not supported. What else is not supported and what are th...
I have run TCP dump on N9K-C9348GC-FXP and saved as pcap file. I am able to read the pcap file in the text(CLI) format but not able to find the file where it has saved in the box .My requirement is I need to move the pcap file to the external server ...
