Hi,I have a topology like below: In brief: 4 x 5672UP with NX-OS version 7.3(1)N1(1); "peer-gateway" and "layer3 peer-router" already configured2 x Checkpoint (CP1 = Active, CP2 = Passive)vPC between CP1 and N5K1 - N5K2vPC between CP2 and N5K3 - N5K4...
Hi,Can you guys please help me with working SNMPv3 configuration on Cisco Nexus N9K switch ?I've read the following link from cisco but still didn't get how to configure it properly. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000...
Hi I have noticed the following error being logged on a Nexus 7700 switch: %MODULE-4-MOD_WARNING: Module 5 (Serial number: JAE20470361) reported warning Ethernet5/25-28 due to single-bit ECC error in device DEV_CLP_L3 (device error 0xcaf06600) The er...
Hi, I am looking for information about usage scenarios of a vpc domain "bypass module-check" command. Limited info I found, does not really explain much.I need to replace M2, F1, M1 modules that are part of a VDC, with F3 - basically rebuilding the V...
Hi all!I would like to set mtu 9216 on port-channel interfaces and standalone interfaces on Nexus 93180.conf tint x/xmtu 9216end Is a restart of the switch necessary to activate mtu 9000? Thank you.
when we're using tera term to take ssh on cisco devices it stucks .is there any solution or work around to fix the problem. model : 9300
I am currently designing 55 racks data center. I plan to use 10 top of rack switches, four end of row aggregate switches and two core switches. The end of raw switch and the top of rack switches will need to be supporting L2/L3 and Open Flow, Includi...
May I ask what caused it The procedure is as follows loader> dir bootflash: lost+found n7000-s2-kickstart.6.2.2a.bin n7000-s2-dk9.6.2.2a.bin vdc_2 scripts 20150606_114612_poap_...
This is regarding HW replacement/migration effort with no-disrupting in network services - from Cisco IOS to NXOS:OSPF Area 4: A new pair of N9K just directly added to the backbone (Area 0)OSPF Area 4: An existing pair of Catalyst IOS 6500s current...
I am using DCNM version 11.4(1) to create a multisite fabric with N9K switches. I have multiple VRFs configured and want to use the automated VRF-Lite extension capability to attach the various VRFs to non fabric devices, for example Campus networks,...
Anyone know if there's a way to get this working on nexus equipment? https://www.juniper.net/documentation/en_US/release-independent/solutions/topics/task/configuration/centrally-routed-overlay-cloud-dc-configuring.html https://eos.arista.com/centr...
Any ideas what might cause/how to resolve this Nexus 9300 reboot loop: Issue:Nexus 93108TC-FX-24Downgrading from version nxos.9.3.5 to version nxos.7.0.3.I7.9 results in a bootloop.Our customer got the switches out of the box and wanted to downgrade ...
This event is an opportunity to have your questions answered on tools available for Nexus 3000 and 9000 Series device/network performance monitoring. Michal will cover usage, configuration, output analysis of available CLI features such as iCAM, tel...
I have a fabric running VXLAN with DCNM 11.4.1 and the compute is running the latest VMware cloud foundation with NSX-T.To get to the NSX-T world VMware runs a Tier0 gateway that is essentially a virtualised router running eBGP so far as the Cisco ne...
We are playing around with DCNM, and we have just configured a new VXLAN BGP EVPN fabric. We can create VRFs and Networks, and everything goes fine. However, we haven't been able to find a way to configure a static route that should point to an exter...
