cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1019
Views
0
Helpful
2
Replies

Cisco FAN speed increases after nxos 9.2.1 upgrade on 3048 switch

davec4351
Beginner
Beginner

Hi - I run a lab and noticed after upgrading that the Cisco upgrade to 9.2.1 from 7.0.3.I4.8a where it was corrected in the below bug, seems to exist in the new 9.2.1 code. Before the upgrade to 9.2.1 the fans were running at 4000RPM , after the upgrade they started to run at 9000RPM. Anyone else experience this issue? 

 

https://quickview.cloudapps.cisco.com/quickview/bug/CSCva93139

2 Replies 2

Rajeshkumar Gatti
Cisco Employee
Cisco Employee

I could not find anything internally being reported yet. Could be because the 9.2.1 release just came out.

I may try to squeeze in some time to test this and revert back. However I also recommend opening a TAC case for this issue.

 

Thanks,

Raj

 

Richard Michael
Cisco Employee
Cisco Employee

There is a known issue related to this. we are working on this and fixing it in next NXOS release. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: