cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2035
Views
0
Helpful
4
Replies

Cisco Nexus 93240 Logging not enough memory

Hi I am haveing a issue with a Nexus 93240 not able to Copy running startup 

pnp-csw-01# copy running-config startup-config
[########################################] 100%
Configuration update aborted: request was aborted

option tried
run bash
sudo su -
cd /nxos/dme_logs/
pwd
ls -l
deleted the .old but still not working last part is to reboot but not an option before service slot

when trying to see log this error comes
Configuration update aborted: request was aborted
pnp-csw-01# sh logg | last 20
not enough memory
pnp-csw-01#

Software
BIOS: version 05.39
NXOS: version 9.3(3)
BIOS compile time: 08/30/2019
NXOS image file is: bootflash:///nxos.9.3.3.bin
NXOS compile time: 12/22/2019 2:00:00 [12/22/2019 14:00:37]

thanks at advanced

1 Accepted Solution

Accepted Solutions

Looks good. You are safe in case of a reload is required.

 

Cheers,

Sergiu

View solution in original post

4 Replies 4

Sergiu.Daniluk
VIP Alumni
VIP Alumni

Hi @jorgenLauridsen28921 

I would suggest to use "show run diff" just to see if there any unsaved config. The output will show differences between running and startup config.

Example:

 

DC-Team-N9K-1# show run diff 
*** Startup-config
--- Running-config
***************
*** 12,23 ****
--- 12,25 ----
 
+ feature nxapi
  feature bash-shell
  feature scp-server
+ cfs eth distribute

What ever is with "+" is present in running but not in startup config.

 

Stay safe,

Sergiu

Great thanks this is the output 

pnp-csw-01# show runn diff
*** Startup-config
--- Running-config
***************
*** 17,26 ****
--- 16,26 ----
limit-resource m4route-mem minimum 58 maximum 58
limit-resource m6route-mem minimum 8 maximum 8
feature-set fex

feature telnet
+ feature bash-shell
cfs eth distribute
feature interface-vlan
feature netflow
feature lacp
feature vpc

Looks good. You are safe in case of a reload is required.

 

Cheers,

Sergiu

Hi, we have the same problem. It's not clear to me what was the solution to:

pnp-csw-01# copy running-config startup-config
[########################################] 100%
Configuration update aborted: request was aborted

pnp-csw-01# sh logg
not enough memory

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: