Recently they told me that we need to have connectivity between two of these VDC. I was reviewing and I understand that it can not be done virtually in the same device, but that it must necessarily be done by external physical connections among the vdc. I do not know if i can just configure a port channel to connect them or it make be done through a vpc, please tell me which would be the most correct way.
I have only ever used a single interface between the VDC, never really thought about using a VPC, cant see what value this would add considering its all on the same device. Depending on the traffic load you could port channel them together.
I have only ever used a single interface between the VDC, never really thought about using a VPC, cant see what value this would add considering its all on the same device. Depending on the traffic load you could port channel them together.
Ok, I will review the traffic that would be generated for this connection and according to this the port channel will be done or only with a cable Thank you so much
Good afternoon Friends, these days I was accessing the DNAC manager and my surprise is that I did not have access, after a basic analysis I observed that the equipment was operational, but without being able to access it via DNA GUI (browser) I also ident...
view more
Today we are going to talk about how to configure backups in the Cisco ACI APIC Dashboard. As you might know APIC is a UCS based CIMC controller and we can check the configuration backups on the Cisco ACI APIC Dashboard. Remember that the HA solution mus...
view more
Listen: https://smarturl.it/CCRS9E14 Follow us: https://twitter.com/CiscoChampion
Organizations are undergoing digital transformation like never before. Global spending on digital transformation of business practices, products, and organization...
view more
