FEX 2000 slot/numbering

[gaigl]

Hello,

we have 5672UP with N2K-C2232PP-10GE and a numbering of the FEX like this:

Rack 56: FEX 156, now I need in a Rack a second FEX.

Can I use the slot-command to enable slot 2, so I had Interfaces 156/1/x and 156/2/x ?

there is not much documentation about the slot-command

[Remi-Astruc · Accepted solution]

Hi @gaigl ,

No, you cannot.

Here is related document:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus2000/sw/configuration/guide/b_Configuring_the_Cisco_Nexus_2000_Series_Fabric_Extender_rel_7_x/b_Configuring_the_Cisco_Nexus_2000_Series_Fabric_Extender_rel_6_0_chapter_01.html#con_1197795