07-22-2020 02:20 AM
Dear all,
There is the following CCO which can support for EVPN multihoming on Neuxs9000 Release 9.3.X.
Chapter: Configuring Multihoming
Chapter: Configuring Multihoming
Enabling EVPN Multihoming
Step 1 - evpn esi multihoming
However if I check with real device it can not accept like the following.
EDGE1(config)# evpn esi multihoming ^ % Invalid command at '^' marker.
I appreciate if you can let me know configuration examples which can accept EVPN esi multihoming.
Regards,
Masanobbu Hiyoshi
07-24-2020 07:02 AM
Hi @mhiyoshi
What platform / version you have? It looks like i have same result on my N9K-C93180YC-FX / 9.3.2. However I do see the command present, but is not accepted.
N9K-2(config)# evpn esi multihoming ^ % Invalid command at '^' marker. N9K-2(config)# show cli list | grep multihoming no evpn esi multihoming evpn esi multihoming
Regards,
Sergiu
07-26-2020 07:11 PM
Hi msdaniluk,
Thank you for your support, well I am using N9K-C93180YC-FX/NX-OS-Ver.9.3(1)
It seems same situation, it shows the command on the list but it can not configure.
EDGE1(config)# evpn esi multihoming ^ % Invalid command at '^' marker. EDGE1(config)# show cli list | grep multihoming no evpn esi multihoming evpn esi multihoming EDGE1(config)# ################# EDGE1(config-if)# evpn multihoming core-tracking ^ % Invalid command at '^' marker. EDGE1(config-if)# show cli list | grep multihoming no evpn multihoming core-tracking evpn multihoming core-tracking EDGE1(config-if)#
Best Regards,
Masanobu Hiyoshi
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: