According to the Cisco Feature Navigator Tool, NX-OS supports WCCP version 2. However, some WCCP functions are not supported in NX-OS, and not all NX-OS platforms will support it. I recommend you use the tool to determine if the specific function you need is supported for your platform.
I hope this is helpful.
David, using Feature Navigator Tool, I coudn't find NX-OS support for WCCPv2, at least not on the N9508 model. Can you help me look for or send me a link on how you got to NX-OS support for WCCPv2 on the N9508, please?
I searched for the WCCP feature set, then looked at WCCP v2 and found it is supported in NX-OS. As I mentioned before, you will need to drill down deeper to see if your specific platform and specific WCCP functions are supported. If you have further questions you can contact your Cisco SE.