11-06-2012 02:07 AM
Whent VSM lose connectivity with VEM's (sometimes happends but I don't know why) I got this logs:
2012 Nov 3 07:24:31.363 sv4025-01 %VEM_MGR-2-VEM_MGR_REMOVE_NO_HB: Removing VEM 5 (heartbeats lost)
2012 Nov 3 07:24:31.364 sv4025-01 %VEM_MGR-2-VEM_MGR_REMOVE_NO_HB: Removing VEM 7 (heartbeats lost)
2012 Nov 3 07:24:31.364 sv4025-01 %VEM_MGR-2-VEM_MGR_REMOVE_NO_HB: Removing VEM 9 (heartbeats lost)
2012 Nov 3 07:24:31.364 sv4025-01 %VEM_MGR-2-VEM_MGR_REMOVE_NO_HB: Removing VEM 10 (heartbeats lost)
2012 Nov 3 07:24:31.364 sv4025-01 %VEM_MGR-2-VEM_MGR_REMOVE_NO_HB: Removing VEM 12 (heartbeats lost)
2012 Nov 3 07:24:31.555 sv4025-01 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel47: Ethernet5/2 is down
2012 Nov 3 07:24:31.556 sv4025-01 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel47: first operational port changed from Ethernet5/2 to Ethernet5/11
2012 Nov 3 07:24:31.557 sv4025-01 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel18: Ethernet5/6 is down
2012 Nov 3 07:24:31.558 sv4025-01 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel18: first operational port changed from Ethernet5/6 to Ethernet5/10
2012 Nov 3 07:24:31.559 sv4025-01 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel16: Ethernet5/3 is down
2012 Nov 3 07:24:31.559 sv4025-01 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel16: first operational port changed from Ethernet5/3 to Ethernet5/8
2012 Nov 3 07:24:31.561 sv4025-01 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel40: Ethernet7/3 is down
2012 Nov 3 07:24:31.561 sv4025-01 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel40: first operational port changed from Ethernet7/3 to Ethernet7/8
2012 Nov 3 07:24:31.598 sv4025-01 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel48: Ethernet7/11 is down
2012 Nov 3 07:24:31.600 sv4025-01 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel42: Ethernet7/6 is down
2012 Nov 3 07:24:31.601 sv4025-01 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel42: first operational port changed from Ethernet7/6 to Ethernet7/10
2012 Nov 3 07:24:31.605 sv4025-01 %VIM-5-IF_DETACHED_MODULE_REMOVED: Interface Ethernet5/2 is detached (module removed)
2012 Nov 3 07:24:31.606 sv4025-01 %VIM-5-IF_DETACHED_MODULE_REMOVED: Interface Ethernet5/3 is detached (module removed)
2012 Nov 3 07:24:31.606 sv4025-01 %VIM-5-IF_DETACHED_MODULE_REMOVED: Interface Ethernet5/6 is detached (module removed)
2012 Nov 3 07:24:31.606 sv4025-01 %VIM-5-IF_DETACHED_MODULE_REMOVED: Interface Ethernet5/8 is detached (module removed)
2012 Nov 3 07:24:31.606 sv4025-01 %VIM-5-IF_DETACHED_MODULE_REMOVED: Interface Ethernet5/10 is detached (module removed)
I'm happy about "Removing VEM" logs but why I got also Interfaces down logs. this drive to missunderstanding information because actually interfaces are not down is the connectivity between VSM and VEM that were lost.
There is a way to avoid this behavior ?
11-06-2012 05:14 AM
if you lose connectivity between the VSM and VEM following a reboot of the ESX server host, it may be caused by a reset of the MTU to its default on the host.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: