Hi, We are attempting to meet the requirements that Dell stipulates in their Nexus document below. The problem is that some of these commands Dell stipulates are not functional on the 3172TQ.
https://www.dell.com/support/kbdoc/en-uk/000126653/powerstore-minimum-configuration-for-utilizing-cisco-nexus-switches-with-powerstoret
For example, Dell states to use the ipv6 unicast-routing command in the above minimum requirements. However, this command is not parsed successfully by the OS.
s-3rd-server-2(config)# ipv6 unicast-routing
^
% Invalid command at '^' marker.
s-3rd-server-2(config)#
We want to configure as little ipv6 here as possible as ipv6 is not used in the collapsed core the Nexus is connected to.
Advice appreciated.