hi
I have problem in my nexus 7k , when I do command show hardware capacity forwarding they show me as the below before I add extend memory to the Supervisor module from 4G RAM To 8G RAM , the problem is the IPv4 Unicast dropped as the after Table in below
before i add the extend 4G RAM :
Module 1 usage:
Route Type | Used (Log/Phys) | %Used | Free (Log/Phys) | %Free | Total (Log/Phys) |
IPv4 Unicast: | 74676/74676 | 65 | 39500/39500 | 34 | 114176/114176 |
L2VPN Peer: | 0/0 | 0 | 0/0 | 0 | 0/0 |
MPLS: | 463/463 | 90 | 49/49 | 9 | 512/512 |
IPv4 Multicast: | 4/8 | 0 | 4044/8088 | 99 | 4048/8096 |
L2VPN IPv4 Mcast: | 0/0 | 0 | 0/0 | 0 | 0/0 |
IPv6 Unicast: | 3/6 | 6 | 45/90 | 93 | 48/96 |
L2VPN IPv6 Mcast: | 0/0 | 0 | 0/0 | 0 | 0/0 |
IPv6 Multicast: | 5/20 | 0 | 2043/8172 | 99 | 2048/8192 |
after I add the 4G RAM :
Route Type | Used (Log/Phys) | %Used | Free (Log/Phys) | %Free | Total (Log/Phys) |
IPv4 Unicast: | 74702/74702 | 91 | 6706/6706 | 8 | 81408/81408 |
L2VPN Peer: | 0/0 | 0 | 0/0 | 0 | 0/0 |
MPLS: | 463/463 | 90 | 49/49 | 9 | 512/512 |
IPv4 Multicast: | 4/8 | 0 | 4044/8088 | 99 | 4048/8096 |
L2VPN IPv4 Mcast: | 0/0 | 0 | 0/0 | 0 | 0/0 |
IPv6 Unicast: | 3/6 | 6 | 45/90 | 93 | 48/96 |
L2VPN IPv6 Mcast: | 0/0 | 0 | 0/0 | 0 | 0/0 |
IPv6 Multicast: | 5/20 | 0 | 2043/8172 | 99 | 2048/8192 |