nexus 7k hsrp issue

[satishmothukri]

Hi all ,

We have vdc x created on both nexus and fabric path is configured.

I have tried to configure vlan 3200 and noticed that standby router is unknown on the 2nd nexus 7k which has priority of 90 (active router hsrp).

When i checked the output of show hsrp interface vlan 3200 on 1st nexus , i am able to see virtual router ip , active router as well as standby router etc.

but when i checked the same output on 2nd nexus( hsrp active for 3200) , i am able to see active router , virtual router ips but standby router is UNKNOWN.

What could be the problem .. I have reconfigured vlan 3200 several times but no luck.

I have so many l3 vlans on it but I am facing the issue with newly created vlan 3200.

[ADP_89]

Hello,

It might be an ACL blocking multicast packets coming from NX1 and going to NX2

HTH,

ADP

[nazimkha]

share your configuration from both nexus