Nexus 9K Traffic Shaping on interface

[paul1202]

Hi,

We have a 2Mb inter-DC link connected to our Nexus 9K's - C93180YC-FX, running 9.2.1.

Does anyone have an example of traffic shaping I could use on the interfaces to ensure the traffic matches end-to-end so that the traffic is "smoothed out" or should I instead use policing?

How can I confirm there is sufficient memory to buffer the traffic if I use shaping?

Thanks in advance.

[shaps]

This could help, if you are just shaping with no QoS then the traffic shaping config is all that is needed.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/92x/qos/configuration/guide/b-cisco-nexus-9000-nx-os-quality-of-service-configuration-guide-92x/b-cisco-nexus-9000-nx-os-quality-of-service-configuration-guide-92x_chapter_01000.h...

[admin@atrinnet.net]

according to this link Can only shape on nexus 9K percent Of speed physical inteferce?

no Can apply by police ???