Having a hard time upgrading the code on this N3K-C3232C, i'd appreciate any advice on this. I am not sure if I am using the incorrect file or if there is a pre-upgrade step I am missing. below are the details from an upgrade attempt.
switch# install all nxos bootflash:nxos.7.0.3.I7.6.bin
Installer will perform compatibility check first. Please wait.
uri is: /nxos.7.0.3.I7.6.bin
Installer is forced disruptive
"Failed to process nxos image".
Pre-upgrade check failed. Return code 0x404F0003 (SRG file not present/cannot be opened).
Solved! Go to Solution.