cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

120
Views
0
Helpful
1
Replies
Highlighted
Beginner

OTV

Hi All,

i have confiugred  two pair of  OTV in my nexus devices DC1 and DC2 . 

DC1 = two devices

DC2= two devices ..

 

i could see the three  adjanceny in every otv device.

but show otv site is showing partial .. site vlan is properly configured .still the partial not chanhg===

site vlan 99

otv extended vlan 100:

 

DC1-7K1# show otv site

Dual Adjacency State Description
Full - Both site and overlay adjacency up
Partial - Either site/overlay adjacency down
Down - Both adjacencies are down (Neighbor is down/unreachable)
(!) - Site-ID mismatch detected

Local Edge Device Information:
Hostname DC1-7K1
System-ID 5000.0001.002f
Site-Identifier 0000.0000.0111
Site-VLAN 99 State is Up

Site Information for Overlay1:

Local device is AED-Capable
Neighbor Edge Devices in Site: 1

Hostname System-ID Adjacency- Adjacency- AED-

State Uptime Capable

--------------------------------------------------------------------------------
switch 5000.0003.002f Partial (!) 00:48:50 Yes

DC1-7K1#

 

1 REPLY 1
VIP Advisor

Re: OTV

Partial - Either site/overlay adjacency down

 

Do you high-level diagram and post all AED config to look.

 

BB
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here