Ping Response Time Issue

[scott.joachim]

Hi,

In deploying N1KV version 5.2.1 and testing ping responses on the management network, we are seeing reply time=0 ms.  Previously, this metric was outputted in three significant figures representing microseconds.  In any event, it should at least be under 1ms and not equal to 0ms.  I presume the total round trip is less than 0.5ms and it is not rounding up...Is there something that I am missing here to get ping responses in microseconds?

Thank you,

Scott

[Robert Burns]

Can you detail from where to where you're pinging, and paste the output of your results here.

Thanks,

Robert

[scott.joachim]

Yes.  I'm pingin from the mgmt0 interface to the default gateway.  Here are the details and the ping output:

mgmt0 is up

  Hardware: Ethernet, address: 001d.d8b7.1c04 (bia 001d.d8b7.1c04)

  Internet Address is 10.201.4.252/24

vrf context management

  ip route 0.0.0.0/0 10.201.4.1

milp-n1kv-1(config-if)# ping 10.201.4.1

PING 10.201.4.1 (10.201.4.1): 56 data bytes

64 bytes from 10.201.4.1: icmp_seq=0 ttl=63 time=0 ms

64 bytes from 10.201.4.1: icmp_seq=1 ttl=63 time=0 ms

64 bytes from 10.201.4.1: icmp_seq=2 ttl=63 time=0 ms

64 bytes from 10.201.4.1: icmp_seq=3 ttl=63 time=0 ms

64 bytes from 10.201.4.1: icmp_seq=4 ttl=63 time=0 ms

Thanks,

Scott

[lwatta]

Let me ping engineering and see if they changed something for some reason