Policing in Nexus -bandwidth limitation

[rishad ahammed]

Hi

  I am trying to implement policing in nexus 5672UP switch.  I want to limit the upload and download bandwidth to 2M on interface vlan 10.

   I have created the policy-map but I am not able to find the "service-policy " command inside the interface.

  Is the are resolution for this ?

[David Castro F.]

Hello Rishad Ahammed,

I hope you are doing great,

It depends on the NX-OS version you have running the MCQ funtionality is available after this release 5.1(3)N2(1) on the Nexus, also if you are getting an issue like "ERROR: QoS Policy on VLAN not allowed,please set interface QoS limit first.", you will need to modify the TCAM limit first:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/qos/521_n1_1/b_5k_QoS_Config_521N11_chapter_01000.html#d2348e346a1635

Keep me posted,

Please rate all the helpful posts and marked as correct if this answered your posts!

David Castro,

[rishad ahammed]

That was really helpful. But I can apply policy only in one direction (input) . Since i am trying to limit the bandwidth on both direction i need apply the policy in both inbound and outbound direction. 

Please advice