used port-profile VM link down / inactive

[thorstenn]

Hi all,

i`m testing the nexus1000v and i have created the following port-profile:

port-profile Test-VM
  vmware port-group
  switchport mode access
  switchport access vlan 110
  no shutdown
  state enabled

I`ve connected to VMs to this profile but my connection won`t come up

On the uplink switch the VLAN110 also exist.

Any suggestions what i forgot?

regards

Thorsten

[thorstenn]

if i make a "no switchport access vlan 110" i can ping the rest of the network..... but if the two machines in the same port profile with vlan 110 it didn`t work.....

what is wrong?

[thorstenn]

ok, my fault. i forgot to create the same vlan on the DVS switch.....