Hi,
I have 2 x 9k switches, connected by vPC. I have setup vPC and this is working fine, as per below:
Keepalive link is via the mgmt0 interface (192.168.200.10 & 20)
Peer-link is a portchannel using 2 x 40Gig links on each switch.
I can confirm this primary vPC environment seems to be working fine.
I have connected this vPC pair to my 6509 Core switch and the portchannel seems to be working fine.
What I now need to do is configure the vPC pair so I can remotely manage each of them on my network management subnet...what is the preferred method for configuring an SVI so I can access each switch via SSH?
My topology and config is attached.
Cheers
Neil
