Cisco Data Center Overlays with focus on VXLAN (Virtual Extensible Local Area Network) (Live Webcast October 20th)
During this live event, Cisco subject matter expert Vishal Mehta will share about Cisco Data Center Overlays with focus on VXLAN (Virtual Extensible Local Area Network). In the modern data center, traditional technologies are limiting the speed, flexibility, scalability, and manageability of application deployments. There is emerging interest in the industry in overlay technologies (such as MPLS, VXLAN, LISP...) which may address some of these challenges. This session will discuss the latest trend in Overlay Technologies and compare each one of the available solutions in terms of deployment, benefits and challenges. The major emphasis in this session will be on VXLAN evolution and to elaborate on which Cisco Products support different VXLAN solutions. Various VXLAN configurations such as BGP-EVPN control plane, L2 Gateway, L3 Gateway; Bridging, Packet-Flow, Best Practices, Deployment scenarios and other advanced features will be also discussed.
Vishal Mehta (Read the Interview) is a Technical Marketing Engineer with Cisco's Data Center Competitive Insights Team based in San Jose, California. Previously he was working as the customer support engineer for Data Center Server Virtualization Technical Assistance Center (TAC) team for the past 4 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and Virtualization. He has CCIE® certification (# 37139) in Routing/Switching, Service Provider & Data Center. Vishal has presented at Cisco Live in Orlando 2013, Milan 2014, and San Francisco 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333).
Good Day I have Cisco UCS (6 blades - all boot from SAN) connected to NetApp Storage FC Mode thorugh MDS 9000 SAN Switch Everything works smoothly, but I recently decided to use Blade 6 for testing purposes without touching the current LUN ...
i would like to ensure some topics below ,from my side is not mandatory for core switches security best practices implementations and may used for acces layer switches . ----Filtering IP Fragments----URPF could you advise...
Dear Experts, One of our customer is evaluating DCI to connect 2 sites across L3 mpls circuit. For DCI they are considering Vxlan (only open standard no OTV or juniper specific etc). From design perspective what i dont understand is, its easy t...