During the live event, Cisco® subject matter experts Varun Mehta and Anupam Asthana focus on basics of Cisco UCS (Unified Computing System), show a demo around upgrade process, and share some troubleshooting tips and tricks with UCS. With lots of companies adopting Cisco UCS, there is need to understand the UCS architecture and the complete firmware upgrade procedure which would help customers/partners to maintain and operate the UCS environment effectively.
This session helps attendees to understand Cisco UCS B series upgrade procedure. Following is the Agenda of the session :
Introduction to UCS Architecture.
UCS Upgrade Procedure.
Troubleshooting, Tips & Tricks related to UCS upgrade .
Upgrade Live Demo.
Varun Mehta is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has five years of total experience. He holds a CCIE (Routing and Switching) no 37698 and has worked on a wide range of Cisco products.
Anupam Asthana is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has nine years of total experience. He has worked on a wide range of Cisco data center products such as Cisco UCS and Cisco Nexus 1000V.
Need more information? Have more questions? Our experts are available until September 24 by clicking the join the discussion button below.
Hey all, Regarding the ACI MSO/APIC, Knowing that RTT between 2 MSOs = 150 msec and RTT between MSO/APIC = 1msec. What is the behavior of the MSOs and APICs when RTT is not met?Does it have any influence on the control plane of the fabrics?...
Hi, I can see every Broadcast Domain has one multicast IP address in our ACI, I am curious to know that where do they get the multicast IP address from? Is it from APIC multicast POOL?I dont see any multicast pool configured in Fabric Access Policies...
Hallo; I'm using Python/Requests for api call to DNAC. The same problem described is also from DNAC itself (dna/platform/app/consumer-portal/developer-toolkit/apis).Edge device is discovered, added to site and provisioned and now ready to insert...
For the record, the client I am at has no monitoring of links / infrastructure at the moment. I am trying to find the bottleneck for a bandwidth issue. Replication across the IPN (Multi-Pod), does not go as high as it should (results +- 100M). S...
I'm getting "undefined" credential when I try to configure ACI application. When I run quick discovery against the IP address to confirm if it's access related issue, it is not. Below are the steps I took:Created mid serverCreated SNMP v3 credential ...