Hello All, Question in Nexus 9.x We have an EoL notice for version 9.3x. There's no replacement available at this time. Can we assume that a version 9.4 version will be released? I don't see any EoL for 9.x at this time. The customer doesn't...
Hello all,I have some Nexus 2K copper FEX's that are already or soon-to-be End-of-Life, and since Cisco is not manufacturing more N2K's, I'm looking at what options I have to replace them while keeping my costs down. The only requirement that I have ...
After upgrade to 2.1.2a, 2 UCS domains actually came with this error.Description: default Keyring's certificate is invalid, reason: unknownCause: invalid-keyring-certificateCode: F0909I did the procedureFI-A# scope securityFI-A/security # scope keyri...
The Cisco Document Team has posted an article. This document describes the most common issues faced with the Voicemail feature in Webex Calling (WxC). Know of something that needs documenting? Share a new document request to do...
Hello all,on one of my SNS-3755-K9 Applience can not open vkvm.after clicking on start and accepting "Load KVM Certifivate" i recieve a blank new Page and 3 Errors (see Screen Shots)Please take a look at this Problem as sonn as possible. Reset Facto...
We have Nexus Dashboard Insights 6.4.1.45 running on a 3 VM Nexus Dashboard 3.1(1k). The Nexus Dashboard cluster is directly connected to the ACI 6.0(4c) fabric. APIC is connected to Nexus Dashboard Insights, and Nexus Dashboard Insights can extract ...
I have a B200 M5 blade that is physically stuck in the chassis.The release handle on the blade will not completely open and will not release the device.Any suggestion on how to remove it?
Hello UCS frinds My Question is -Can I change the Chassis/FEX discovery Policy ONLINE from "none" to "port Channel" After I set it to Port Channel i have to reacknowledge the Chassis Can I Do this online? Without intetrrupt?
Hi All,I'm currently designing an ACI solution for a single customer that wants to use multiple tenants for different business functions (prod, dmz, dev etc) whilst using the same physical infrastructure. For ACI, I typically configure separate VLAN ...
OLVM requires fence agent setup for power managementAll listing of Service Profiles in the Cisco 6296 environment with B200M3's were testing fine.Listing Service Profiles : fence_cisco_ucs --ip='10.16.16.80' --username='fence-kvm-user' --password='fe...
The Cisco Document Team has posted an article. This document describes how to setup Extra Packages for Enterprise Linux (EPEL) as third party repository on the Cisco Open NX-OS. Know of something that needs documenting? Share a...
Using Cisco Umbrella as firewall and attempting to play video that requires "jwplayer6" which is being blocked. Where do I search for the Clients IP Address in Umbrella so I can tell precisely what's going on? Thanks in advance.
Hello,we are performing a staging and firmware updates on a bunch of C220 M5 standalone servers delivered with CIMC 4.1(2a) loaded. After initial CIMC setup we are able to connect to CIMC GUI, all looking fine, however, we are unable to launch vKVM c...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: