Solved: Re: Getting Last Endpoint Connection From DNAC API?

malcomx · ‎04-04-2025

I currently have a Python function that will grab an endpoint's last wireless connection using Prime's API. The issue I'm running into is the client-detail API call will only give inactive connection info for about 24 hours before. Does anybody know a DNAC API call that will give last given connection information without having to provide timestamps?

Ruben Cocheno · ‎04-25-2025

@malcomx

There is a new API call to provide that info, i recommended to look into the docs

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

View solution in original post

bigevilbeard · ‎04-04-2025

@malcomx Seems you have asked this before my friend.

https://community.cisco.com/t5/devnet-general-discussions/getting-last-endpoint-connection-from-dnac-api/td-p/5099635

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io

Ruben Cocheno · ‎04-25-2025

@malcomx

There is a new API call to provide that info, i recommended to look into the docs

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/