Just wanted to let the team know - today I had the same issue. I set up two labs (both collaboration UCM 11.5). Both times I was not able to access the lab via AnyConnect. I tried from a Windows 10 PC and from a Mac. My userid was "steffenwen" IIRC.
I have some issues here.
>I have downloaded the cisco anyconnect from the provided link, in the end, I have a sign which says the installation is complete but is not. The software is not installed. Just not there.
>The other issues are none of the links provided works. I cannot open any of them
The information provided to your VPN client Anyconnect/Openconnect etc.. Here is link showing you how to connect to your sandbox - https://developer.cisco.com/docs/sandbox/#!first-reservation-guide/reservation-hello-world
Username: nedji.nuri devnetsandbox-us-sjc.cisco.com:20104
Hello Team,- today I had the same issue. I set up two NX-OS with Nexus 9Kv labs Both times I was not able to access the lab via AnyConnect. I tried from a Windows 10 PC . My userid was "evanburban" please assist
Try this, go to Network Connections from Control Panel, right-click Cisco AnyConnect Security Mobility Client Connection, and choose Properties. Then disable IPv6, change IPv4 IP settings from Fixed IP to Dynamic. Close all Network Properties dialog boxes, and try VPN connecting again.
Hope this helps.
Check the port(s) are not blocked by your local firewall and/or provider. Try another sandbox which will give you another destination VPN head end, this will see if you can also connect.
Hope this helps.
@bigevilbeard I have setup a sandbox but the vpn credentials are not working. It says login failed
Lab Network Address: devnetsandbox-emea-gwy.cisco.com:20214