cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
756
Views
1
Helpful
5
Replies

Lab not working: IR1101 - Industrial Routing and Edge Compute

jubor
Cisco Employee
Cisco Employee

The following lab has a malfunctioning IR1101. While after the lab has finished setting up, the environment shows "Active (with error)". Moreover, the IR 1101 shows to not be properly started. 

Screenshot 2023-03-28 at 10.08.43.pngScreenshot 2023-03-28 at 10.21.56.png

5 Replies 5

@jubor cancel the reservation and start a new/fresh one - this normally clears the error for me.

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io

jubor
Cisco Employee
Cisco Employee

Thanks for the response. I have already cancelled the lab 3 times in total. Unfortunately, the problems reoccurs. 

Might be an issue in the back end then, engineering team would need to look further.

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io

I will close my 3rd reservation today and will try tomorrow.

jubor
Cisco Employee
Cisco Employee

Is this topic getting addressed by a Cisco engineer? Or is the lab just gonna stay faulty for the foreseeable future?