cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1007
Views
0
Helpful
3
Replies
Cisco Employee

2960-Plus 24LC-L issue with lanlite image

HI all,

 

According to Cisco site 2960-Plus 24LC-L switch should support lanlite image "c2960-lanlitek9-mz.152-2.E6.bin ", but i am unable to boot the switch with this image. It goes into booting loop showing error " THE HARDWARE IS NOT SUPPORTED BY FIRMWARE "

 

Switch Model : c2960-lanlitek9-mz.152-2.E6.bin

IOS tried : c2960-lanlitek9-mz.152-2.E6.bin, c2960-lanlitek9-mz.152-2.E7.bin

 

but the switch is working fine with lanbase image.

 

can anyone help me to find out the exact reason for this behavior?

 

Thanks & Regards

Sarwar Chowdhury

3 REPLIES
Hall of Fame Guru

Re: 2960-Plus 24LC-L issue with lanlite image


@sarwchow wrote:

Switch Model : c2960-lanlitek9-mz.152-2.E6.bin


That is not the "switch model".  

 

What is the exact model of the switch?

Cisco Employee

Re: 2960-Plus 24LC-L issue with lanlite image

This is the model, please find the attachment.

Engager

Re: 2960-Plus 24LC-L issue with lanlite image

Hi there,

The feature set lanlite/ lanbase is fixed to switch and cannot be changed by either licensing or IOS images.

If you have a lanbase switch then stick with those images. Besides the lanbase feature set is superior to that offered by lanlite.

 

cheers,

Seb.

CreatePlease to create content
Ask the Expert- MPLS troubleshooting