I have a customer interested in implementing APIC-EM on their enterprise network. For now, they would use it only for the main building(central site) as their branch routers do not support APIC-EM. For them it is important to monitor the bandwidth usage on links between the routers and swithces in their network. Is it managable with the use of APIC-EM?
I have searched through some documentation and I used the demo for APIC-EM on dCloud but I was not able to figure it out. I saw that IWAN can be used to monitor the usage of certain applications for a specific site but I still didn't figure out how to see the bandwidth usage of a certain link between to switches or between a router and a switch
Is it possible? And if yes I would be happy to receive any advise on how it can be done.
Webcast video: Introduction to the Web of Things: What is it and why is it useful?
This event provides an overview of the Web of Things (WoT), from its definition and architecture, to its main components, scripting, and use cases sample...
The promise of a network that can detect problems on its own, lets IT management system know, debugs and isolates the problem, seeks permission to rectify it, and then actually goes out and does it, must feel like utopia! Surely, this is the stuff of the ...
Background : There is growing interest for SDWAN capability on NFVIS based virtual branch. SDWAN XE code enables SDWAN with key features that are part of IOS XE codebase, including WAN diversity option with T1/E1, LTE, etc.
This Howto document ...