el 03-07-2014 03:42 PM
Hi all,
I have two N7K with all licenses that were purchased with SUP1.
Now we will change the SUP1 for a SUP 2E.
It's necessary to purchase licensing again knowing this attached by chassis and not by supervisor?
When i change the SUP1 to SUP 2E all the licenses that i had active in SUP1 goes on SUP 2E?
¡Resuelto! Ir a solución.
el 03-11-2014 12:37 PM
Hello Hans,
Please see this link
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_hig_book/n7k_replacing.html#wp1410535
You will need to copy licenses to the new Sup
HTH
Yamil
el 03-11-2014 12:37 PM
Hello Hans,
Please see this link
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_hig_book/n7k_replacing.html#wp1410535
You will need to copy licenses to the new Sup
HTH
Yamil
el 04-04-2014 07:49 AM
Yamil,
thanks for your help, you are right for the answer.
Regards.
Hans V.
¡Conecte con otros expertos de Cisco y del mundo! Encuentre soluciones a sus problemas técnicos o comerciales, y aprenda compartiendo experiencias.
Queremos que su experiencia sea grata, le compartimos algunos links que le ayudarán a familiarizarse con la Comunidad de Cisco:
Navegue y encuentre contenido personalizado de la comunidad