How to upgrade CAT4500 VSS?

[oscar.cuevas1]

Hi everyone.

I want to upgrade a switch CAT4500 but it's in VSS with another CAT4500, I have only 2 switches in this VSS.

When I put this command:

boot system flash bootflash:CAT-IMAGE.bin  boot system flash slovebootflash:CAT-IMAGE-bin

then reload with this "redundancy reload shelf"

The vss turns up but stills in the same image.

Best regards

How could I upgrade ? are there other way to upgrade?

[Julio E. Moisa · Accepted solution]

Hi

You should upload the image on both 4500, and set up the boot system flash bootflash:IMAGE

Then reboot the devices with the command: redundancy reload shelf

Regards. 

[oscar.cuevas1 · Accepted solution]

Updated.

The issue was the image wasn't correct.

Thanks for your help.

Regards