Hola: Tengo dos equipos Nexus configurados con OSPF pero quiero que conmute apagando una interface.
SWITCH1# sh run | inc ospf
feature ospf
ip ospf network point-to-point
no ip ospf passive-interface
ip router ospf 1 area 0.0.0.0
ip ospf network point-to-point
no ip ospf passive-interface
ip router ospf 1 area 0.0.0.0
router ospf 1
SWITCH1#
interface Ethernet1/49
description * *
switchport
switchport mode trunk
switchport trunk allowed vlan 1700
speed 1000
duplex full
no shutdown
interface Vlan1700
description * *
no shutdown
no ip redirects
ip address 10.../30
no ipv6 redirects
ip ospf network point-to-point
no ip ospf passive-interface
ip router ospf 1 area 0.0.0.0
SWTICH2# sh run | inc ospf
feature ospf
ip ospf network point-to-point
no ip ospf passive-interface
ip router ospf 1 area 0.0.0.0
ip ospf network point-to-point
no ip ospf passive-interface
ip router ospf 1 area 0.0.0.0
router ospf 1
interface Ethernet1/49
description * *
switchport
switchport mode trunk
switchport trunk allowed vlan 1700
no shutdown
interface Vlan1700
description **
no shutdown
no ip redirects
ip address 10..../30
no ipv6 redirects
ip ospf network point-to-point
no ip ospf passive-interface
ip router ospf 1 area 0.0.0.0
Si trato de configurar el ip ospf cost en los puertos trunk no lo soporta. Solo en la vlan 1700
Saludos,
